Hot File

Guide Node.js for Beginners

View: 394    Dowload: 0   Comment: 0   Post by: hanhga  
Author: none   Category: MySQL   Fields: Other

9 point/2 review File has been tested

To start using Node.js, you must first understand the differences between Node.jsand traditional server-side scripting environments

Introduction

To start using Node.js, you must first understand the differences between Node.jsand traditional server-side scripting environments (eg: PHP, Python, Ruby, etc).

Node.js uses a module architecture to simplify the creation of complex applications.

Chances are good that you are familiar with asynchronous programming; it is, after all, the "A" in Ajax. Every function in Node.js is asynchronous. Therefore, everything that would normally block the thread is instead executed in the background. This is the most important thing to remember about Node.js. For example, if you are reading a file on the file system, you have to specify a callback function that is executed when the read operation has completed.

Node.js is only an environment - meaning that you have to do everything yourself. There is not a default HTTP server, or any server for that matter. This can be overwhelming for new users, but the payoff is a high performing web app. One script handles all communication with the clients. This considerably reduces the number of resources used by the application. For example, here is the code for a simpleNode.js application:

And here is the equivalent written in PHP:

$a = null;
$b = null;
$c = null;
$i = null;
$max = 1000000000;
 
$start = microtime(true);
 
for ($i = 0; $i < $max; $i++) {
    $a = 1234 + 5678 + $i;
    $b = 1234 * 5678 + $i;
    $c = 1234 / 2 + $i;
}
 
var_dump(microtime(true) - $start);

Now let's look at the benchmark numbers. The following table lists the response times, in milliseconds, for these two simple applications:

Number of iterations Node.js PHP
100 2.00 0.14
10'000 3.00 10.53
1'000'000 15.00 1119.24
10'000'000 143.00 10621.46
1'000'000'000 11118.00 1036272.19

I executed the two apps from the command line so that no server would delay the apps' execution. I ran each test ten times and averaged the results. PHP is notably faster with a smaller amount of iterations, but that advantage quickly dissolves as the number of iterations increases. When all is said and done, PHP is 93% slower than Node.js!

Node.js is fast, but you will need to learn a few things in order to use it properly.

Node.js uses a module architecture to simplify the creation of complex applications. Modules are akin to libraries in C, or units in Pascal. Each module contains a set of functions related to the "subject" of the module. For example, the http module contains functions specific to HTTP. Node.js provides a few core modules out of the box to help you access files on the file system, create HTTP and TCP/UDP servers, and perform other useful functions.

Including a module is easy; simply call the require() function, like this:

Node.js is only an environment; you have to do everything yourself.

The require() function returns the reference to the specified module. In the case of this code, a reference to the http module is stored in the http variable.

In the above code, we passed the name of a module to the require() function. This causes Node to search for a node_modules folder in our application's directory, and search for the http module in that folder. If Node does not find the node_modulesfolder (or the http module within it), it then looks through the global module cache. You can also specify an actual file by passing a relative or absolute path, like so:

Modules are encapsulated pieces of code. The code within a module is mostly private - meaning that the functions and variables defined within them are only accessible from the inside of the module. You can, however, expose functions and/or variables to be used outside of the module. To do so, use the exports object and populate its properties and methods with the pieces of code that you want to expose. Consider the following module as an example:

This code creates a PI variable that can only be accessed by code contained within the module; it is not accessible outside of the module. Next, two functions are created on the exports object. These functions are accessible outside of the module because they are defined on the exports object. As a result, PI is completely protected from outside interference. Therefore, you can rest assured thatarea() and circumference() will always behave as they should (as long as a value is supplied for the r parameter).

Node is a JavaScript environment running in Google's V8 JavaScript engine. As such, we should follow the best practices that we use for client-side development. For example, we should avoid putting anything into the global scope. That, however, is not always possible. The global scope in Node is GLOBAL (as opposed to windowin the browser), and you can easily create a global variable of function by omitting the var keyword, like this:

Once again, globals should be avoided whenever possible. So be careful and remember to use var when declaring a variable.

Naturally, we need to install Node before we can write and execute an app. Installation is straight forward, if you use Windows or OS X; the nodejs.org website offers installers for those operating systems. For Linux, use any package manager. Open up your terminal and type:

or:

Node.js is in sid repositories; you may need to add them to your sources list:

But be aware that installing sid packages on older systems may break your system. Be careful, and remove /etc/apt/sources.list.d/sid.list after you finish installing Node.

Node.js has a package manager, called Node Package Manager (NPM). It is automatically installed with Node.js, and you use NPM to install new modules. To install a module, open your terminal/command line, navigate to the desired folder, and execute the following command:

It doesn't matter what OS you have; the above command will install the module you specify in place of module_name.

Naturally, our first Node.js script will print the text 'Hello World!' to the console. Create a file, called hello.js, and type the following code:

Now let's execute the script. Open the terminal/command line, navigate to the folder that contains hello.js, and execute the following command:

You should see 'Hello World!' displayed in the console.

Let's move on to a more advanced application; it's not as complicated as you may think. Lets start with the following code. Read the comments and then the explanation below:

This code is very simple. You can send more data to the client by using theresponse.write() method, but you have to call it before calling response.end(). Save this code as http.js and type this into your console:

Open up your browser and navigate to http://localhost:8080. You should see the text "Hello HTTP!" in the page.

As I mentioned earlier, we have to do everything ourselves in Node, including parsing request arguments. This is, however, fairly simple. Take a look at the following code:

This code uses the parse() method of the url module, a core Node.js module, to convert the request's URL to an object. The returned object has a query property, which retrieves the URL's parameters. Save this file as get.js and execute it with the following command:

Then, navigate to http://localhost:8080/?data=put_some_text_here in your browser. Naturally, changing the value of the data parameter will not break the script.

To manage files in Node, we use the fs module (a core module). We read and write files using the fs.readFile() and fs.writeFile() methods, respectively. I will explain the arguments after the following code:

Node.js has a package manager, called Node Package Manager (NPM). It is automatically installed withNode.js

Save this as files.js. Before you run this script, create a file named test.txt in the same directory as files.js.

This code demonstrates the fs.readFile() and fs.writeFile() methods. Every time the server receives a request, the script reads a number from the file, increments the number, and writes the new number to the file. The fs.readFile()method accepts three arguments: the name of file to read, the expected encoding, and the callback function.

Writing to the file, at least in this case, is much more simple. We don't need to wait for any results, although you would check for errors in a real application. Thefs.writeFile() method accepts the file name and data as arguments. It also accepts third and fourth arguments (both are optional) to specify the encoding and callback function, respectively.

Now, let's run this script with the following command:

Open it in browser (http://localhost:8080) and refresh it a few times. Now, you may think that there is an error in the code because it seems to increment by two. This isn't an error. Every time you request this URL, two requests are sent to the server. The first request is automatically made by the browser, which requestsfavicon.ico, and of course, the second request is for the URL (http://localhost:8080).

Even though this behavior is technically not an error, it is behavior that we do not want. We can fix this easily by checking the request URL. Here is the revised code:

Most traditional server-side technologies have a built-in means of connecting to and querying a database. With Node.js, you have to install a library. For this tutorial, I've picked the stable and easy to use node-mysql. The full name of this module ismysql@2.0.0-alpha2 (everything after the @ is the version number). Open your console, navigate to the directory where you've stored your scripts, and execute the following command:

This downloads and installs the module, and it also creates the node_modules folder in the current directory. Now let's look at how we can use this in our code; see the following example:

Querying the database with this library is easy; simply enter the query string and callback function. In a real application, you should check if there were errors (theerror parameter will not be undefined if errors occurred) and send response codes dependent upon the success or failure of the query. Also note that we have set the Content-Type to x-application/json, which is the valid MIME type for JSON. The rows parameter contains the result of the query, and we simply convert the data in rows to a JSON structure using the JSON.stringify() method.

Save this file as mysql.js, and execute it (if you have MySQL installed, that is):

Navigate to http://localhost:8080 in your browser, and you should be prompted to download the JSON-formatted file.

Guide Node.js for Beginners

Guide Node.js for Beginners Posted on 12-01-2016  To start using Node.js, you must first understand the differences between Node.jsand traditional server-side scripting environments 4.5/10 394

Comment:

To comment you must be logged in members.

Files with category

 
Newsletter Email

File suggestion for you

File top downloads

logo codetitle
Codetitle.com - library source code to share, download the file to the community
Copyright © 2015. All rights reserved. codetitle.com Develope by Vinagon .Ltd